Vane vacuum pump manufacturer

Vane vacuum pump manufacturer of vane vacuum pumps should use mineral oil or synthetic oil that meets specifications.Both types of oil can meet the requirements of vane vacuum pumps,but each has its own advantages.Mineral oil is refined from crude oil and has good lubricity and heat dissipation properties,but poor high temperature resistance;Synthetic oil,on the other hand,is an artificially synthesized chemical substance with good high-temperature resistance,but at a higher price.
1.Choose the appropriate oil product
Oil type and operating temperature:Vane vacuum pump manufacturer of different types of vane vacuum pumps need to use different types of oil,and the performance of the oil should meet the operating temperature requirements of the pump.
2.Oil viscosity:It is recommended to choose oil with a viscosity between ISOVG32-46,as viscosity can affect the pumping speed and pressure of the pump.

3.Oil oxidation resistance and emulsification resistance:Vane vacuum pump manufacturer of vane vacuum pumps should choose oil with good antioxidant properties to prevent oil deterioration;At the same time,the oil has good emulsion resistance to quickly separate water from the oil.

4.Oil volatility:The oil in the vane vacuum pump cannot evaporate,otherwise it will cause a decrease in pump pressure and oil loss,affecting equipment performance and service life.
In short,choosing the appropriate lubricating oil and regularly replacing and cleaning it is the key to maintaining the performance and service life of blade vacuum pump manufacturers.By following the selection recommendations and maintenance guidelines provided in this article,you will be able to better maintain and use your vane vacuum pump.