Vacuum negative pressure station manufacturer

The control methods of vacuum negative pressure station manufacturer mainly include single pump control and dual pump control,as follows:
1.Single pump automatic or manual control:This is the basic control method,and you can choose to operate a single vacuum pump automatically or manually according to your needs.
2.Dual pumps,one on and one standby:In this mode,one vacuum negative pressure station manufacturer works while the other is on standby.When the working pump fails,the backup will automatically take over the work to ensure the continuous operation of the system.
3.Dual pump separation and single pump timed automatic cycle operation control:In this mode,two pumps work alternately,and each pump has a fixed operating time to ensure that each pump can receive appropriate rest and maintenance.
4.Dual pump simultaneous linkage operation automatic control:In this mode,two pumps work simultaneously to jointly undertake the pumping task,which is suitable for situations that require high pumping volume.
The basic composition and functional characteristics of a vacuum negative pressure station include:
1.Equipment composition:A vacuum negative pressure station is composed of a single or double vacuum pump as the main equipment for obtaining vacuum,a vacuum tank as the vacuum storage device,and connected to the electrical control part.The work of vacuum negative pressure station manufacturers can enhance the security of the system.
2.Vacuum degree control:The vacuum upper and lower limits of the vacuum station can be set between 0~-0.1Mpa through the vacuum gauge,and the manufacturer's error value of the vacuum negative pressure station is within 10%.After startup,the vacuum level inside the vacuum tank remains between the set upper and lower limits.

3.Energy saving and extended service life:For situations where the vacuum source is frequently used but the pumping volume is not large,this system is more energy-efficient than directly using a vacuum pump and can effectively extend the service life of the vacuum pump,improving the economic efficiency of the enterprise.

4.Protection equipment:Each pump is equipped with an inflatable electromagnetic check valve to prevent vacuum return oil failure.Special industries can also design metal or dust filters according to customer requirements to effectively protect vacuum acquisition equipment.
In summary,manufacturers of vacuum negative pressure stations have various control methods,and different manufacturers provide different control solutions based on their own product characteristics and market demand.Choosing the appropriate vacuum negative pressure station manufacturer control method can not only improve production efficiency,but also ensure the long-term stable operation of the equipment.