2BV water ring vacuum pump manufacturer

The monitoring points of 2BV water ring vacuum pump manufacturer during operation mainly include the following aspects:
1. Monitoring working parameters: When using a 2BV water ring vacuum pump, it is necessary to monitor the manufacturer's working parameters in real time, such as speed, power, pressure, etc., to ensure its safe operation.

2. Check the equipment status: Regularly inspect the fastening of various parts of the 2BV water ring vacuum pump manufacturer to ensure mechanical safety. At the same time, check the sealing of the pump body, bearing wear, impeller balance, etc., replace worn parts in a timely manner, and clean impurities inside the pump.

3. Water quality management: The water quality as the working medium directly affects the performance and service life of the pump. Therefore, regular testing and treatment of water quality should be carried out to ensure that the water is clean and free of impurities, in order to reduce wear and corrosion on the pump body.
4. Temperature control: During wafer processing, the water temperature may rise due to friction and heat accumulation. Excessive water temperature can reduce the pumping efficiency of the vacuum pump and even damage the pump body. Therefore, it is necessary to set up a suitable cooling system to maintain the water temperature within a reasonable range.
5. Vacuum monitoring: Real time monitoring of vacuum changes during the production process to ensure that they fluctuate within the allowable range. Once an abnormal decrease in vacuum degree is detected, the cause should be immediately identified and measures taken to solve it, in order to avoid affecting product quality.
The 2BV water ring vacuum pump is installed eccentrically in the pump body through the impeller, and when started, a certain height of water is injected into the pump. When the impeller rotates, water is subjected to centrifugal force and forms a rotating water ring on the inner wall of the pump body. The inner surface of the lower part of the water ring of the 2BV water ring vacuum pump manufacturer is tangent to the hub. As the impeller rotates, the gas pressure in the space decreases and the gas is sucked in; During the second half of the rotation, the pressure of the space gas increases, and when it exceeds the pressure at the exhaust port, the gas is discharged. In this way, every time the impeller rotates, the space absorbs and exhausts gas once, thereby achieving continuous suction or pressure delivery of gas.